Hitachi Compute Blade 500 Series Management Module Setup Guide

Saving LPAR manager configuration information
Perform the following procedure for saving LPAR manager configuration
information. When a server blade is turned on, LPAR manager configuration
information can be saved.
1. Click Resources.
2. Click Modules
> Right pointing triangle to All Modules then Server
Blades > target server blade.
2-142
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide

Hitachi Compute Blade 500 Series Specifications

General

Brand	Hitachi
Model	Compute Blade 500 Series
Category	Server
Language	English