Hitachi Compute Blade 500 Series - Import File Format and Modification

Tip: To download the import result file, select Download last import
log
and click Confirm.
10. Log out of Web console.
Import file format and modification
Import file format
You can configure the following setting with the import file format shown in
the next page.
•
Time setting
¢
Time zone: +0:00
¢
Daylight saving time: disabled
• Protocol setting
This allows connections with Telnet, SSH, FTP, HTTP, and HTTPS.
Connection permission settings for IPv4 addresses and IPv6 addresses
¢
Allows connections via all protocols.
¢
Port number for HTTP: 80
¢
Port number for HTTPS: 443
• Network setting
¢
IP address for management modules
2-256
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide