Hitachi Compute Blade 500 Series - User Management; Account and Password; Account

User management
This section describes user management for management modules.
Account and password
An account and password are required to use the following console functions
on management module.
Log in to console
When log in to Web console and CLI console, you must enter the account and
password to avoid illegal login. Multiple accounts can be created to be used
by users respectively.
Sending and receiving files using FTP protocol
The management module can send and receive files in user directory to the
FTP server using the FTP protocol. When using the send and receive function,
you need to enter the account and password.
Tip: When logging in to the LCD touch console, the account is not required.
You can set a PIN to avoid illegal login. For details about the PIN, see LCD
touch console on page 2-7.
Account
The account can be created, changed, and deleted through the management
module console. You can register up to 16 accounts. For details about setting
items when creating a new account, see the Hitachi Compute Blade 500
Series Web Console User's Guide or the Hitachi Compute Blade 500 Series
CLI Console User's Guide.
The following table shows the setting items to create a new account.
The following table shows the account that is set as factory default setting in
the management module.
Table 2-1 Default account
Item Description
Account name administrator
Status Enable
Role Administrators
Language Depending on the system setting
CLI console prompt <Chassis ID><SVPSlotNumber>$
Session timeout 10 minutes
Password password
Functional detail
2-3
Hitachi Compute Blade 500 Series Management Module Setup Guide