Table 2-8 Integrated role
Item Description
Administrators This role has been granted all privileges.
Note: When assigning the privilege of server blades in SMP configuration to a
role, select all server blades in the SMP configuration on the console.
Role configuration
The role can be created, changed, and deleted through the management
module Web console. You can register up to 16 roles but not including the
integrated role.
Table 2-9 Web console operation
Item Operation
Displaying/setting role Administration tab > Users and Roles > Action button >
Show and edit role settings
Table 2-10 CLI console operation
Item Operation
Displaying role show user role
Adding role add user role
Modifying role modify user role
Deleting role delete user role
Tip: When server blades are in an SMP configuration, assign the privileges for
all server blades constituting the SMP configuration.
LCD touch console
•
Setting PIN
The account authentication is not performed for the LCD touch console.
You can set up a PIN to prevent illegal use of the LCD touch console. The
LCD touch console can be operated when you enter the PIN.
The PIN settings are configured on the system unit. You can enter same
PIN code even when using different LCD touch consoles.
A PIN is four-digit numeric codes. The PIN authentication is disabled for
factory default setting. The PIN code is not displayed in the window, so
keep your PIN in a secure place. When you forget the PIN, you can
initialize PIN through the web console. The PIN authentication is disabled
when initializing PIN.
Functional detail
2-7
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
