Hitachi Compute Blade 500 Series - Import Overview; Import Execution

Import overview
This function configures all settings described in Setting items for import on
page 2-250
to the server chassis at the initial setting. A setting file created by
this function is referred to as import file. The following two devices can be
used for the import function.
• LCD touch console
• Web console
Figure 2-12 Example of import with LCD touch console
Setting items for import
The following three settings can be configured by executing the import.
•
Time settings including time zones and daylight saving time
See
Time settings on page 2-8 for details.
•
Protocol settings including Telnet, SSH, FTP, HTTP, and HTTPS
See
Security on page 2-26 for details.
• Network settings for IP address of management modules, server blades,
and switch modules. See IP address on page 2-18 for details.
Import execution
This subsection describes import execution.
For LCD touch console
The following steps provide how to import files using the LCD touch console.
2-250
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide