Hitachi Compute Blade 500 Series - Security Strength and Features

Security strength and features
Features for management modules and BMC use the following protocols and
encryption methods depending on the Security strength setting.
Management Module
Feature Protocol
Security strength
Default high
Web console HTTP Available
Not available
1
HTTPS
Available
6
Available
(TLS 1.2)
2
CLI console TELNET Available
Not available
1
SSH Available (SSHv2) Available (SSHv2)
File transmit/receive FTP Available
Not available
1
SFTP Available (SSHv2) Available (SSHv2)
SNMP function SNMP (v1/v2c) Available
Not available
3
SNMP (v3) Available Available
Notification by E-mail SMTP Available
Not available
4
SMTP (StartTLS)
Available
6
Not available
(TLS 1.2)
LDAP Server Linkage LDAPS
Available
6
Available
Time synchronization NTP Available Available
HCSM linkage HTTPS or Hitachi
protocol
Available
6
Available
(TLS 1.2)
ServerConductor/Blade
Server Manager
Hitachi protocol
Available
5
Available
5
Hi-Track HTTPS Available Available
Syslog transfer SYSLOG
Available
5
Available
5
HA monitor linkage Hitachi protocol
Available
5
Available
5
Notes:
1. The port is isolated.
2. A browser supporting SSL/TLS version to use is needed.
3. No response is returned to the manager request. No trap is issued.
4. No e-mail is sent.
5. Communication can be disabled by the user.
6. The available encryption protocols are SSL3.0, and TLS1.0, 1.1, and 1.2. If the
communication protocol is HTTPS, you need to use a browser that supports the SSL
or TLS version to be used.
Functional detail
2-31
Hitachi Compute Blade 500 Series Management Module Setup Guide