Tip: For details of the remote console and the virtual media console, see
the Hitachi Compute Blade 500 Series Remote Console User's Guide.
8. Confirm the following message is displayed in the boot order window,
click OK.
9. The virtual drive as boot device is added in the USB device.
HBA boot driver settings
When the necessary device is not displayed in HBA tab, confirm the HBA boot
driver settings as following procedure and perform the necessary settings.
1. Select HBA
tab in Boot order settings window.
2. Select HBA
port, and click HBA boot settings.
Functional detail
2-157
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
