Hitachi Compute Blade 500 Series - Page 225

¢
When selecting a bank with "Assigned (enable to overwrite firmware)"
for State in step 4, select server blades to back up the configuration in
Target of Backup LP Settings
pane and click Backup.
8. Click Backup.
Tip:
•
The same number of files as that of selected server blades for target
will be downloaded.
• For the procedure to back up a file, follow the operating procedure for
OS.
• For management module firmware version A0145 or later, the
following is the backup file name format.
hvm-pX-VVRR-YYYYMMDDhhmmss.backup
"X" indicates a partition number: server blade number; VVRR
indicates the LP version currently assigned.
9. Click OK.
Functional detail
2-201
Hitachi Compute Blade 500 Series Management Module Setup Guide