Hitachi Compute Blade 500 Series - Page 277

14. Remove the USB flash drive from the server chassis.
15. Touch Logout on System setting menu to disconnect the LCD touch
console.
16. The following Logout confirmation appears, touch OK.
17. Check that "Please remove LCD touch console." is shown on the logout
window.
18. Remove the LCD touch console from the server chassis.
For Web console
The following steps provide how to import files using the Web console.
Requirements
•
System console
Importing procedure
1. Create an import file referring to
Import file format and modification on
page 2-256, and store it into the system console.
Note: Create a file name for import using up to 200 alphanumerics.
2. Log into Web console of the management module on the system console.
Note: Use an account with administrators role to log in. Import is
available only for accounts with the administrators role. Administrator by
default has the administrators role.
3. Select Resources tab.
4. Select Chassis from the Modules tree.
5. Select Import System Settings from Action menu.
Functional detail
2-253
Hitachi Compute Blade 500 Series Management Module Setup Guide