Hitachi Compute Blade 500 Series - Page 360

ID Level Message
Description
FFCB Info Module information of <X> changed.
[Meaning] The module information has been changed. X indicates the module name.
[Action] No particular action required.
FFCC Info Module information (constitution setting)
of <X> changed.
[Meaning] The module information has been changed. X indicates the module name.
[Action] No particular action required.
FFCD Info System information changed.
[Meaning] The device information has been changed.
[Action] No particular action required.
Messages in the table above are shown when you use the management
module firmware version A0150 or later and SEL dictionary version A0067 or
later. With firmware earlier than A150 or SEL dictionary earlier than A0067,
some messages are different from those above.
A-16
HCSM alert log message
Hitachi Compute Blade 500 Series Management Module Setup Guide