Disconnect the trailingĆcable connector from the cartridgeĆcarriage PCA.
If you need to change the trailing cable:
Cut the two plastic ties that hold the
cable to the rear tray and bracket.
Free the cable from the rear tray and
bracket, pulling it up through the slot at
the top of the electronics enclosure
assembly.
Rear tray
Plastic ties
Bracket
Trailing-cable connector
Cartridge-carriage PCA
Use the old trailing cable as a template
to bend and crease the new trailing cable
to exactly match the creases in the old
trailing cable.
6Ć30 Removal and Replacement
C3187Ć90000
To Next Page
Loading...
