87
Parameters
1: Specifies the RIP version as RIPv1.
2: Specifies the RIP version as RIPv2. RIPv2 messages are multicast.
Usage guidelines
An interface prefers the RIP version configured on it over the global RIP version. If no RIP version is
specified for the interface and the global version is RIPv1, the interface uses RIPv1, and it can send RIPv1
broadcasts, and receive RIPv1 broadcasts and unicasts. If no RIP version is specified for the interface and
the global version is RIPv2, the interface uses RIPv2 multicast mode. It can send RIPv2 multicasts, and
receive RIPv2 broadcasts, multicasts, and unicasts.
Examples
# Specify the global RIP version as RIPv2.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] version 2
Related commands
rip version
To Next Page
Loading...
Need help?
General
