468
Table 118 Command output
Field Descri
tion
Nexthop Next hop address.
Interface Output interface.
RefCount Reference count (routes that reference the next hop).
Status Next hop status: valid or invalid.
NbrId Neighbor router ID.
NbrIntID Neighbor interface ID.
display ospfv3 non-stop-routing
Use display ospfv3 non-stop-routing to display OSPFv3 NSR information.
NOTE:
This command is available in Release 2311P04 and later versions.
Syntax
display ospfv3 [ process-id ] non-stop-routing
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays OSPFv3 status information for all OSPFv3 processes.
Examples
# Display OSPFv3 NSR information for all OSPFv3 processes.
<Sysname> display ospfv3 non-stop-routing
OSPFv3 Process 1 with Router ID 3.3.3.3
Nonstop Routing capability: Enabled
Upgrade phase : Normal
Table 119 Command output
Field Descri
tion
Nonstop Routing
capability
NSR status: enabled or disabled.
To Next Page
Loading...
Need help?
General
