309
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays the BGP IPv4 unicast route
statistics for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display statistics of BGP IPv4 unicast routes for the public network.
<Sysname> display bgp routing-table ipv4 statistics
Total number of routes: 4
display bgp routing-table ipv6 unicast
Use display bgp routing-table ipv6 unicast to display BGP IPv6 unicast routing information.
Syntax
display bgp routing-table ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address
prefix-length | advertise-info ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays the BGP IPv6 unicast routing
information for the public network.
network-address prefix-length: Specifies the destination network address and prefix length. The value
range for the prefix-length argument is 0 to 128. If this argument is not specified, the command displays
brief information about all BGP IPv6 unicast routing information.
advertise-info: Displays advertisement information for BGP IPv6 unicast routes. If this keyword is not
specified, the command displays the BGP IPv6 unicast routing table.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display brief information about all BGP IPv6 unicast routes for the public network.
<Sysname> display bgp routing-table ipv6
Total number of routes: 1
BGP local router ID is 192.168.1.136
Status codes: * - valid, > - best, d - dampened, h - history,
To Next Page
Loading...
Need help?
General
