HP 5920 Series

428
[Sysname-ripng-100] filter-policy 3000 import
graceful-restart
Use graceful-restart to enable Graceful Restart (GR) for RIPng.
Use undo graceful-restart to disable RIPng GR capability.
Syntax
graceful-restart
undo graceful-restart
Default
RIPng GR is disabled.
Views
RIPng view
Predefined user roles
network-admin
Examples
# Enable GR for RIPng process 1.
<Sysname> system-view
[Sysname] ripng 1
[Sysname-ripng-1] graceful-restart
import-route
Use import-route to redistribute routes from another routing protocol.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | route-policy route-policy-name ] *
undo import-route protocol [ process-id ]
Default
RIPng does not redistribute routes from another routing protocol.
Views
RIPng view
Predefined user roles
network-admin
Parameters
protocol: Specifies a routing protocol from which RIPng redistributes routes. It can be bgp4+, direct,
isisv6, ospfv3, ripng, or static.
process-id: Specifies a process by its ID in the range of 1 to 65535. The default is 1. This argument is
available only when the protocol is isisv6, ospfv3, or ripng.