2
Examples
# Create a RIB IPv6 address family and enter RIB IPv6 address family view.
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv6
[Sysname-rib-ipv6]
display ecmp mode
Use display ecmp mode to display the ECMP mode.
Syntax
display ecmp mode
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the ECMP mode.
<Sysname> display ecmp mode
ECMP-Mode in use: Default
ECMP-Mode at the next reboot: Enhanced
display ip routing-table
Use display ip routing-table to display routing table information.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays the routing table information for the
public network.
verbose: Displays detailed routing table information, including information about both active and
inactive routes. Without this keyword, the command displays only brief information about active routes.
Examples
# Display brief information about active routes in the routing table.
To Next Page
Loading...
Need help?
General
