126
Network 12.18.0.1 2.2.2.2 80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
Table 42 Command output
Field Descri
tion
The Router's Neighbor is Router ID Neighbor router ID.
Address Neighbor interface IP address.
Interface Interface address of the router.
Area Area ID.
Retrans List Retransmission list.
Type LSA type.
LinkState ID Link state ID.
AdvRouter Advertising router.
Sequence LSA sequence number.
Age LSA age.
display ospf routing
Use display ospf routing to display OSPF routing information.
Syntax
display ospf [ process-id ] routing [ ip-address { mask-length | mask } ] [ interface interface-type
interface-number ] [ nexthop nexthop-address ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays the routing information for all OSPF processes.
ip-address: Specifies a destination IP address.
mask-length: Specifies mask length in the range of 0 to 32.
mask: Specifies the mask in dotted decimal notation.
interface interface-type interface-number: Displays routes passing the specified output interface. Without
this option, the command displays OSPF routing information for all interfaces.
nexthop nexthop-address: Displays routes passing the specified next hop. Without this option, the
command displays all OSPF routing information.
verbose: Displays detailed OSPF routing information. Without this keyword, the command displays brief
OSPF routing information.
To Next Page
Loading...
Need help?
General
