HP 5920 Series User Manual

534
Predefined user roles
network-admin
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be direct, static, ripng, isisv6,
bgp4+, or ospfv3.
process-id: Specifies a process by its ID in the range of 1 to 65535. It is available only when the protocol
is ripng, isisv6, or ospfv3.
cost cost: Specifies a cost for redistributed routes, in the range of 0 to 4261412864.
level-1: Redistributes routes into the Level-1 routing table.
level-1-2: Redistributes routes into Level-1 and Level-2 routing tables.
level-2: Redistributes routes into the Level-2 routing table.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to filter redistributed routes.
tag tag: Specifies an administrative tag for marking redistributed routes, in the range of 1 to
4294967295.
allow-ibgp: Allows redistribution of IBGP routes. This keyword is available only when the protocol is
bgp4+.
Usage guidelines
IPv6 IS-IS considers redistributed routes as AS-external routes.
You can specify a cost and a level for redistributed routes.
The import-route bgp4+ command redistributes only EBGP routes. The import-route bgp4+ allow-ibgp
command redistributes both EBGP and IBGP routes, and might cause routing loops. Therefore, use it with
caution.
Examples
# Configure IPv6–IS-IS to redistribute static routes and set the cost for redistributed routes to 15.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 import-route static cost 15
ipv6 import-route isisv6 level-1 into level-2
Use ipv6 import-route isisv6 level-1 into level-2 to enable route advertisement from Level-1 to Level-2.
Use undo ipv6 import-route isisv6 level-1 into level-2 to disable route advertisement from Level-1 to
Level-2.
Syntax
ipv6 import-route isisv6 level-1 into level-2 [ filter-policy { acl6-number | prefix-list prefix-list-name |
route-policy route-policy-name } | tag tag ] *
undo ipv6 import-route isisv6 level-1 into level-2
Default
Route advertisement from Level-1 to Level-2 is enabled.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English