HP 5920 Series

119
Field Descri
p
tion
Nexthop Next hop address.
Interface Output interface.
RefCount Reference count (routes that reference the next hop).
Status Next hop status: valid or invalid.
display ospf non-stop-routing status
Use display ospf non-stop-routing status to display OSPF NSR status information.
Syntax
display ospf [ process-id ] non-stop-routing status
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays OSPF NSR status information for all OSPF processes.
Examples
# Display OSPF NSR status information.
<Sysname> display ospf non-stop-routing status
OSPF Process 1 with Router ID 192.168.33.12
Non Stop Routing information
-----------------------------------------
Non Stop Routing capability : Enabled
Upgrade phase : Normal
Table 37 Command output
Field Descri
p
tion
Non Stop Routing
capability
NSR status: enabled or disabled.
Upgrade phase
Upgrade phase:
• Prepare—Upgrade preparation phase.
• Restore Smooth—Upgrade phase.
• Preroute—Route pre-calculation phase.
• Calculating—Route calculation phase.
• Redisting—Route redistribution phase.
• Original and age—LSA generation and aging phase.
• Normal—Normal status.