HP 5920 Series

252
Predefined user roles
network-admin
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535 to clear the data structure
information for an IS-IS process.
graceful-restart: Recovers the data through graceful restart after the data is cleared.
Usage guidelines
If no IS-IS process is specified, the command clears data structure information for all IS-IS processes.
Use this command when LSPs must be updated immediately.
Examples
# Clear all IS-IS data structure information.
<Sysname> reset isis all
reset isis graceful-restart event-log
Use reset isis graceful-restart event-log to clear IS-IS GR log information.
Syntax
reset isis graceful-restart event-log slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its ID.
Examples
# Clear IS-IS GR log information about IRF member device 1.
<Sysname> reset isis graceful-restart event-log slot 1
reset isis non-stop-routing event-log
Use reset isis non-stop-routing event-log to clear IS-IS NSR log information.
Syntax
reset isis non-stop-routing event-log slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an IRF member device by its ID.