HP 5920 Series

200
Table 59 Command output
Field Descri
p
tion
NSR phase
NSR phase:
• Initialization.
• Smooth.
• First SPF computation.
• Redistribution.
• Second SPF computation.
• LSP stability—Ready to generate LSPs.
• LSP generation.
• Finish.
display isis peer
Use display isis peer to display IS-IS neighbor information.
Syntax
display isis peer [ statistics | verbose ] [ process-id ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
statistics: Displays IS-IS neighbor statistics.
verbose: Displays detailed IS-IS neighbor information. Without this keyword, the command displays brief
IS-IS neighbor information.
process-id: Displays IS-IS neighbor information for an IS-IS process specified by its ID in the range of 1
to 65535. Without this argument, the command displays neighbor information for all IS-IS processes.
standby slot slot-number: Displays backup IS-IS neighbor information for an IRF member device. Without
this option, the command displays IS-IS neighbor information.
Examples
# Display brief IS-IS neighbor information.
<Sysname> display isis peer
Peer information for IS-IS(1)
-----------------------------
System Id: 0000.0000.0001
Interface: Vlan2 Circuit Id: ---
State: Up HoldTime: 27s Type: L1(L1L2) PRI: 64