HP 5920 Series

172
Related commands
ospf prefix-suppression
reset ospf counters
Use reset ospf counters to clear OSPF statistics.
Syntax
reset ospf [ process-id ] counters
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Clears the statistics for an OSPF process specified by its ID in the range of 1 to 65535.
Examples
# Clear OSPF statistics for all processes.
<Sysname> reset ospf counters
reset ospf process
Use reset ospf process to restart all OSPF processes or a specified process.
Syntax
reset ospf [ process-id ] process [ graceful-restart ]
Views
User view
Predefined user roles
network-admin
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
graceful-restart: Resets the OSPF process by using GR.
Usage guidelines
If no process is specified, this command restarts all OSPF processes.
The reset ospf process command performs the following actions:
• Clears all invalid LSAs without waiting for their timeouts.
• Makes a newly configured Router ID take effect.
• Starts a new round of DR/BDR election.
• Does not remove previous OSPF configurations.
The system prompts you to select whether to reset OSPF process upon execution of this command.