HP 5920 Series

562
display ip community-list
Use display ip community-list to display BGP community list information.
Syntax
display ip community-list [ basic-community-list-number | adv-community-list-number | name
comm-list-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
basic-community-list-number: Specifies a basic community list by its number in the range of 1 to 99.
adv-community-list-number: Specifies an advanced community list by its number in the range of 100 to
199.
name comm-list-name: Specifies a community list by its name, a case-sensitive string of 1 to 63
characters that cannot contain only numbers.
Usage guidelines
If no community list is specified, this command displays information about all BGP community lists.
Examples
# Display information about all BGP community lists.
<Sysname> display ip community-list
Community List Basic aaa
permit
Community List Advanced bbb
permit 3333
Table 140 Command output
Field Descri
p
tion
Community List Basic Basic community list.
Community List Advanced Advanced community list.
permit
Match mode:
• permit.
• deny.
display ip extcommunity-list
Use display ip extcommunity-list to display BGP extended community list information.
Syntax
display ip extcommunity-list [ ext-comm-list-number ]