To Next Page

To Previous Page

535

Views

IS-IS view

Predefined user roles

network-admin

Parameters

filter-policy: Specifies a filtering policy.

acl6-number: Specifies an IPv6 ACL by its number in the range of 2000 to 3999.

prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63

characters.

route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63

characters.

tag tag: Specifies an administrative tag for marking redistributed routes, in the range of 1 to

4294967295.

Usage guidelines

This command enables a Level-1-2 router to redistribute Level-1 routes to Level-2 routers and Level-1-2

routers in the local area.

Examples

# Enable route advertisement from Level-1 to Level-2.

<Sysname> system-view

[Sysname] isis 1

[Sysname-isis-1] ipv6 import-route isisv6 level-1 into level-2

ipv6 import-route isisv6 level-2 into level-1

Use ipv6 import-route isisv6 level-2 into level-1 to enable IPv6 IS-IS route advertisement from Level-2 to

Level-1.

Use undo ipv6 import-route isisv6 level-2 into level-1 to restore the default.

Syntax

ipv6 import-route isisv6 level-2 into level-1 [ filter-policy { acl6-number | prefix-list prefix-list-name |

route-policy route-policy-name } | tag tag ] *

undo ipv6 import-route isisv6 level-2 into level-1

Default

Route advertisement from Level-2 to Level-1 is disabled.