HP 5920 Series User Manual

563
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ext-comm-list-number: Specifies an extended community list by its number in the range of 1 to 199.
Without this argument, the command displays information about all BGP extended community lists.
Examples
# Display information about BGP extended community list 1.
<Sysname> display ip extcommunity-list 1
Extended Community List Number 1
permit rt : 9:6
Table 141 Command output
Field Descri
p
tion
Extended Community List
Number
Extended community list.
permit
Match mode:
• permit.
• deny.
rt Route Target (RT) extended community attribute.
display route-policy
Use display route-policy to display routing policy information.
Syntax
display route-policy [ name route-policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters. Without this argument, this command displays information about all routing policies.
Examples
# Display information about routing policy 1.
<Sysname> display route-policy name policy1
Route-policy: policy1

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English