108
display ospf event-log spf
Use display ospf event-log spf to display OSPF route calculation log information for a process.
Syntax
display ospf [ process-id ] event-log spf
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays OSPF route calculation log information for all processes.
Usage guidelines
The route statistics are the number of routes newly installed to the IP routing table.
Examples
# Display OSPF route calculation log information for all processes.
<Sysname> display ospf event-log spf
OSPF Process 1 with Router ID 1.1.1.2
SPF log
Date Time Duration Intra Inter External Reason
2012-06-27 15:28:26 0.95 1 1 10000 Intra-area LSA
2012-06-27 15:28:23 0.2 0 0 0 Area 0 full neighbor number
2012-06-27 15:28:19 0 0 0 0 Intra-area LSA
2012-06-27 15:28:19 0 0 0 0 external LSA
2012-06-27 15:28:19 0.3 0 0 0 Intra-area LSA
2012-06-27 15:28:12 0 1 0 0 Intra-area LSA
2012-06-27 15:28:11 0 0 0 0 Routing policy
2012-06-27 15:28:11 0 0 0 0 Intra-area LSA
Table 29 Command output
Field Descri
tion
Date/Time Time when the route calculation starts.
Duration Duration of the route calculation, in seconds.
Intra Number of intra-area routes newly installed to the IP routing table.
Inter Number of inter-area routes newly installed to the IP routing table.
External Number of external routes newly installed to the IP routing table.
To Next Page
Loading...
Need help?
General
