HP 5920 Series User Manual

298
Table 80 Command output
Field Descri
p
tion
Status codes
Status codes:
• * – valid—Valid route.
• > – best—Best route.
• d – dampened—Dampened route.
• h – history—History route.
• s – suppressed—Suppressed route.
• S – stale—Stale route.
• i – internal—Internal route.
• e – external—External route.
Origin
Origin of the route:
• i – IGP—Originated in the AS. The origin of summary routes and
routes advertised with the network command is IGP.
• e – EGP—Learned through EGP.
• ?– incomplete—Unknown origin. The origin of routes redistributed
from IGP protocols is INCOMPLETE.
Network Destination network address.
From Source IP address of the route.
Flaps Number of routing flaps.
Duration Duration time of the flap route.
Reuse Reuse time of the route.
Path/Ogn
AS_PATH and ORIGIN attributes of the route:
• AS_PATH attribute—Records the ASs the route has passed to avoid
routing loops.
• ORIGIN attribute—Identifies the origin of the route.
Related commands
• dampening
• reset bgp flap-info ipv4 unicast
display bgp routing-table flap-info ipv6 unicast
Use display bgp routing-table flap-info ipv6 unicast to display BGP IPv6 unicast route flap statistics.
Syntax
display bgp routing-table flap-info ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ network-address
[ network-address prefix-length | as-path-acl as-path-acl-number ]
Views
Any view
Predefined user roles
network-admin
network-operator

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English