HP 5920 Series

245
Examples
# Map the host name RUTB to the system ID 0000.0000.0041 of the remote IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
Related commands
display isis name-table
ispf enable
Use ispf enable to enable IS-IS incremental SPF (ISPF).
Use undo ispf enable to disable IS-IS ISPF.
Syntax
ispf enable
undo ispf enable
Default
IS-IS ISPF is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
When a network topology is changed, ISPF recomputes only the affected part of the SPT, instead of the
entire SPT.
Examples
# Enable IS-IS ISPF.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ispf enable
log-peer-change
Use log-peer-change to enable the logging of neighbor state changes.
Use undo log-peer-change to disable the logging.
Syntax
log-peer-change
undo log-peer-change
Default
The logging of IS-IS neighbor state changes is enabled.