HP 5920 Series

521
IntCost : 0 Tag :
State : Active
Table 131 Command output
Field Descri
p
tion
Route information for IS-IS(1) Redistributed route information for IS-IS process 1.
Level-1 IPv6 Redistribute Table Redistributed route information of IS-IS Level-1.
Level-2 IPv6 Redistribute Table Redistributed route information of IS-IS Level-2.
Type
Redistributed route types:
• Direct.
• IS-ISv6.
• Static.
• OSPFv3.
• BGP4+.
• RIPng.
Destination IPv6 destination address.
IntCost Internal route cost.
ExtCost External route cost.
Tag Tag value.
State Indicates whether the redistributed route is valid.
display isis route ipv6
Use display isis route ipv6 to display IPv6 IS-IS route information.
Syntax
display isis route ipv6 [ ipv6-address ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Displays IPv6 IS-IS route information with the specified IPv6 destination address.
level-1: Displays Level-1 IPv6 IS-IS route information.
level-2: Displays Level-2 IPv6 IS-IS route information.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 route information.