137
Syntax
dscp dscp-value
undo dscp
Default
The DSCP value for outgoing OSPF packets is 48.
Views
OSPF view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63 for outgoing OSPF packets.
Examples
# Set the DSCP value for outgoing OSPF packets to 63 in OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] dscp 63
enable link-local-signaling
Use enable link-local-signaling to enable the OSPF link-local signaling (LLS) capability.
Use undo enable link-local-signaling to disable the OSPF LLS capability.
Syntax
enable link-local-signaling
undo enable link-local-signaling
Default
OSPF link-local signaling capability is disabled.
Views
OSPF view
Predefined user roles
network-admin
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
enable out-of-band-resynchronization
Use enable out-of-band-resynchronization to enable the OSPF out-of-band resynchronization
(OOB-Resynch) capability.
To Next Page
Loading...
Need help?
General
