560
medium: Sets the medium prefix priority for routes.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set prefix priority critical for routes
matching prefix list abc.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ip address prefix-list abc
[Sysname-route-policy-policy1-10] apply prefix-priority critical
apply tag
Use apply tag to set a specified tag for IGP routes.
Use undo apply tag to restore the default.
Syntax
apply tag value
undo apply tag
Default
No routing tag is set for IGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
value: Specifies the tag value in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a tag of 100.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply tag 100
continue
Use continue to specify the next node to be matched.
Use undo continue to restore the default.
Syntax
continue [ node-number ]
undo continue
Default
No next node is specified.
To Next Page
Loading...
Need help?
General
