HP 5920 Series

100
Field Descri
p
tion
Calculation trigger type
Route calculation trigger type:
• Full—Calculation of all routes is triggered.
• Area topology change—Topology change in an area.
• Intra router change—Incremental intra-area route change.
• ASBR change—Incremental ASBR route change.
• 7to5 translator—Type-7-to-Type-5 LSA translator role
change.
• Full IP prefix—Calculation of all IP prefixes is triggered.
• Full intra AS—Calculation of all intra-AS prefixes is
triggered.
• Inc intra AS—Calculation of incremental intra-AS prefixes is
triggered.
• Full inter AS—Calculation of all AS-external prefixes is
triggered.
• Inc inter AS—Calculation of incremental AS-external
prefixes is triggered.
• N/A—Route calculation is not triggered.
Current calculation type
Current route calculation type:
• SPF calculation.
• Intra router calculation—Intra-area route calculation.
• ASBR calculation—Inter-area ASBR route calculation.
• Inc intra router—Incremental intra-area route calculation.
• Inc ASBR calculation—Incremental inter-area ASBR route
calculation.
• 7to5 translator—Type-7-to-Type-5 LSA calculation.
• Full intra AS—Calculation of all intra-AS prefixes.
• Inc intra AS—Calculation of incremental intra-AS prefixes.
• Full inter AS—Calculation of all AS-external prefixes.
• Inc inter AS—Calculation of incremental AS-external
prefixes.
• Forward address—Forwarding address calculation.
• N/A—Route calculation is not triggered.
Current calculation phase
Current route calculation phase:
• Calculation area topology—Calculating area topology.
• Calculation router—Calculating routes on routers.
• Calculation intra AS—Calculating intra-AS routes.
• 7to5 translator—Calculating Type-7-to-Type-5 LSAs.
• Forward address—Calculating forwarding addresses.
• Calculation inter AS—Calculating AS-external routes.
• Calculation end—Ending phase of calculation.
• N/A—Route calculation is not triggered.
Process reset state
Process reset state:
• N/A—The process is not reset.
• Under reset—The process is in the reset progress.
• Under RIB smooth—The process is synchronizing the RIB.