HP 5920 Series User Manual

111
Restarter : None
Helper : None
Area: 0.0.0.0
Authtype: None Area flag: Normal
Area up Interface count: 2
Interface: 40.4.0.1 (Vlan-interface40)
Restarter state: Normal State: P-2-P Type: PTP
Last exit reason:
Restarter : None
Helper : None
Neighbor count of this interface: 1
Number of neighbors under Helper: 0
Neighbor IP address GR state Last Helper exit reason
3.3.3.3 40.4.0.3 Normal None
Virtual-link Neighbor-ID -> 4.4.4.4, Neighbor-State: Full
Restarter state: Normal
Interface: 20.2.0.1 (Vlink)
Transit Area: 0.0.0.1
Last exit reason:
Restarter : None
Helper : None
Neighbor IP address GR state Last Helper exit reason
4.4.4.4 20.2.0.4 Normal Reset neighbor
Table 31 Command output
Field Descri
p
tion
OSPF Process 1 with Router ID 1.1.1.1
Graceful Restart information
GR information for OSPF process 1 with router ID 1.1.1.1.
Graceful Restart capability
Indicates whether GR is enabled:
• Enable(IETF)—IETF GR is enabled.
• Enable(Nonstandard)—Non-IETF GR is enabled.
• Disable—GR is disabled.
Graceful Restart support
GR modes that the process supports (the modes are
displayed only when GR is enabled):
• Planned and un-planned—Supports both planned and
unplanned GR.
• Planned only—Supports only planned GR.
• Partial—Supports partial GR.
• Global—Supports global GR.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English