134
Field Descri
tion
Inter area Number of inter-area routes.
ASE Number of ASE routes.
# Display OSPF error statistics.
<Sysname> display ospf statistics error
OSPF Process 1 with Router ID 192.168.1.112
OSPF Packet Error Statistics
0 : Router ID confusion 0 : Bad packet
0 : Bad version 0 : Bad checksum
0 : Bad area ID 0 : Drop on unnumbered link
0 : Bad virtual link 0 : Bad authentication type
0 : Bad authentication key 0 : Packet too small
0 : Neighbor state low 0 : Transmit error
0 : Interface down 0 : Unknown neighbor
0 : HELLO: Netmask mismatch 0 : HELLO: Hello-time mismatch
0 : HELLO: Dead-time mismatch 0 : HELLO: Ebit option mismatch
0 : DD: MTU option mismatch 0 : DD: Unknown LSA type
0 : DD: Ebit option mismatch 0 : ACK: Bad ack
0 : ACK: Unknown LSA type 0 : REQ: Empty request
0 : REQ: Bad request 0 : UPD: LSA checksum bad
0 : UPD: Unknown LSA type 0 : UPD: Less recent LSA
Table 48 Command output
Field Descri
tion
Router ID confusion Packets with duplicate router ID.
Bad packet Packets illegal.
Bad version Packets with wrong version.
Bad checksum Packets with wrong checksum.
Bad area ID Packets with invalid area ID.
Drop on unnumbered link Packets dropped on the unnumbered interface.
Bad virtual link Packets on wrong virtual links.
Bad authentication type Packets with invalid authentication type.
Bad authentication key Packets with invalid authentication key.
Packet too small Packets too small in length.
Neighbor state low Packets received in low neighbor state.
Transmit error Packets with error when being transmitted.
Interface down Shutdown times of the interface.
Unknown neighbor Packets received from unknown neighbors.
HELLO: Netmask mismatch Hello packets with mismatched mask.