191
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays the IS-IS Level-1 GR state.
level-2: Displays the IS-IS Level-2 GR state.
process-id: Specifies a process by its ID in the range of 1 to 65535. Without this argument, the command
displays GR state of all IS-IS processes.
Examples
# Display IS-IS GR state.
<Sysname> display isis graceful-restart status
Restart information for IS-IS(1)
--------------------------------
Restart status: COMPLETE
Restart phase: Finish
Restart t1: 3, count 10; Restart t2: 60; Restart t3: 300
SA Bit: supported
Level-1 restart information
---------------------------
Total number of interfaces: 1
Number of waiting LSPs: 0
Level-2 restart information
---------------------------
Total number of interfaces: 1
Number of waiting LSPs: 0
Table 53 Command output
Field Descri
tion
Restart status
Current GR state:
• RESTARTING—In this state, forwarding can be
ensured.
• STARTING—In this state, forwarding cannot be
ensured.
• COMPLETE—GR is completed.
To Next Page
Loading...
Need help?
General
