193
standby slot slot-number: Displays backup IS-IS interface information for an IRF member device. Without
this option, the command displays IS-IS interface information.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface information for IS-IS(1)
----------------------------------
Interface: Vlan-interface2
ID IPv4.State IPv6.State MTU Type DIS
001 Up Up 1497 L1/L2 No/No
# Display detailed IS-IS interface information.
<Sysname> display isis interface verbose
Interface information for IS-IS(1)
----------------------------------
Interface: Vlan-interface2
ID IPv4.State IPv6.State MTU Type DIS
001 Up Up 1497 L1/L2 No/No
SNPA address : 000c-2972-ac4d
IP address : 1.1.1.1
Secondary IP address(es) :
IPv6 link-local address : FE80::20C:29FF:FE72:AC4D
CSNP timer value : L1 10 L2 10
Hello timer value : L1 10 L2 10
Hello multiplier value : L1 3 L2 3
Lsp timer value : L12 33
LSP max transmition count : L12 5
Cost : L1 10 L2 10
Priority : L1 64 L2 64
IPv4 BFD : Disabled
IPv6 BFD : Disabled
Table 54 Command output
Field Descri
tion
Interface Interface type and number.
ID Circuit ID.
IPv4.State IPv4 state.
IPv6.State IPv6 state.
MTU Interface MTU.
Type Interface link adjacency type.
DIS Whether the interface is elected as the DIS or not.
SNPA address Subnet access point address.
To Next Page
Loading...
Need help?
General
