HP 5920 Series User Manual

202
Field Descri
p
tion
Type
Circuit type:
• L1—Means the circuit type is Level-1 and the neighbor is a Level-1 router.
• L2—Means the circuit type is Level-2 and the neighbor is a Level-2 router.
• L1(L1L2)—Means the circuit type is Level-1 and the neighbor is a Level-1-2
router.
• L2(L1L2)—Means the circuit type is Level-2 and the neighbor is a Level-1-2
router.
PRI DIS priority of the neighbor.
Area Address(es) Area address of the neighbor.
Peer IP Address(es) IP address of the neighbor.
Uptime Time elapsed since the neighbor relationship was formed.
Adj Protocol Adjacency protocol.
Peer local circuit ID Circuit ID of the neighbor.
Peer circuit SNPA address SNPA address of the neighbor.
Graceful Restart capable The neighbor has the GR helper capability.
Restarting signal RR flag.
Suppress adjacency
advertisement
SA flag.
# Display IS-IS neighbor statistics.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 1/0 0/0
LAN Level-2 1/0 0/0
P2P 0/0 0/0
Table 61 Command output
Field Descri
p
tion
Type
Neighbor type:
• LAN Level-1—Number of Level-1 neighbors whose network type is broadcast.
• LAN Level-2—Number of Level-2 neighbors whose network type is broadcast.
• P2P—Number of neighbors whose network type is P2P.
IPv4 Up Number of IPv4 neighbors in up state.
IPv4 Init Number of IPv4 neighbors in init state.
IPv6 Up Number of IPv6 neighbors in up state.
IPv6 Init Number of IPv6 neighbors in init state.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English