17
network-operator
Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed next hop information for IPv6 direct routes. Without this keyword, the
command displays brief next hop information for IPv6 direct routes.
Examples
# Display brief next hop information for IPv6 direct routes.
<Sysname> display ipv6 route-direct nib
Total number of nexthop(s): 115
NibID: 0x20000000 Sequence: 0
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: ::
IFIndex: 0x111 LocalAddr: ::
NibID: 0x20000001 Sequence: 1
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
UserKey1: 0x0 Nexthop: ::1
IFIndex: 0x112 LocalAddr: ::1
...
Table 4 Command output
Field Descri
tion
NibID ID of the NIB.
Sequence Sequence number of the NIB.
Type Type of the NIB.
Flushed Indicates whether the route with the NIB has been flushed to the FIB.
UserKey0 Reserved data 1.
UserKey1 Reserved data 2.
VrfNthp VPN to which the next hop belongs.
Nexthop Next hop address.
IFIndex Interface index.
LocalAddr Local interface address.
# Display detailed next hop information for IPv6 direct routes.
<Sysname> display ipv6 route-direct nib verbose
Total number of nexthop(s): 115
NibID: 0x20000000 Sequence: 0
Type: 0x1 Flushed: Yes
UserKey0: 0x0 VrfNthp: 1
To Next Page
Loading...
Need help?
General
