25
{ The system ANDs the destination IPv6 address in each active route entry with the entered prefix
length.
If the two operations yield the same result for an entry with a prefix length not greater than the
entered prefix length, the entry is displayed.
• display ipv6 routing-table ipv6-address longer-match:
{ The system ANDs the entered destination IPv6 address with the prefix length in each active route
entry.
{ The system ANDs the destination IPv6 address in each active route entry with the prefix length
in the entry.
If the two operations yield the same result for multiple entries, the entry with the longest prefix
length is displayed.
• display ipv6 routing-table ipv6-address prefix-length longer-match:
{ The system ANDs the entered destination IPv6 address with the entered prefix length.
{ The system ANDs the destination IPv6 address in each active route entry with the entered prefix
length.
If the two operations yield the same result for multiple entries with a prefix length not greater than
the entered prefix length, the entry with the longest prefix length is displayed.
• display ipv6 routing-table ipv6-address1 to ipv6-address2:
The system displays route entries with destinations in the range of ipv6-address1/128 to
ipv6-address2/128.
Examples
# Display brief information about the routes to the destination IPv6 address 10::1 127.
<Sysname> display ipv6 routing-table 10::1 127
Summary Count: 3
Destination: 10::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 10::/68 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Destination: 10::/120 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
# Display brief information about the most specific route to the destination IPv6 address 10::1 and prefix
length 127.
<Sysname> display ipv6 routing-table 10::1 127 longer-match
Summary Count : 1
Destination: 10::/120 Protocol : Static
NextHop : :: Preference: 60
To Next Page
Loading...
Need help?
General
