HP 5920 Series User Manual

33
Table 11 Command output
Field Descri
p
tion
RIB GR state
RIB GR status:
• Start—GR starts.
• IGP end—All IGP protocols complete GR.
• VPN-triggering end—Optimal route selection triggered by VPN routes
completes.
• VPN-calculation end—Optimal VPN route selection completes.
• Routing protocol end—All routing protocols complete GR.
• NSR-calculation unfinished—NSR has not finished optimal route selection.
• Triggering start—All triggered optimal route selection starts.
• Triggering end—All triggered optimal route selection completes.
• Phase1-calculation end—Optimal route selection phase 1 completes.
• All end—All protocols complete GR.
• Phase2-calculation end—Optimal route selection phase 1 completes.
RCOM GR state
RCOM GR status:
• Start—GR starts.
• VPN-calculation end—Optimal VPN route selection completes.
• VPN-notification end—VPN routes have been delivered to the route
management module.
• Routing protocol end—All routing protocols complete GR.
• NSR-calculation unfinished—NSR has not finished optimal route selection.
• Phase1-calculation end—Optimal route selection phase 1 completes.
• Notification end—All routes have been delivered to the route management
module.
• Phase2-calculation end—Optimal route selection phase 2 completes.
• Flush start—Starts to flush routes to the FIB.
• Flush end—Completes flushing routes to the FIB.
No. Protocol number.
Lifetime Lifetime (in seconds) of routes/labels in the RIB during GR.
FD Handle between the protocol and the RIB.
State
Protocol GR state:
• Init—Initialization state.
• Listen—Listening state.
• Idle.
• Active.
• Start—GR starts.
• End—GR completes.
Start/End
Message sending state:
• No—The message has not been sent.
• Yes—The message has been sent.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English