HP 5920 Series

450
Field Descri
p
tion
Current calculation phase
Current route calculation phase:
• Calculation area topology—Calculating area
topology.
• Calculation router—Calculating routes on routers.
• Calculation intra AS—Calculating intra-AS routes.
• Calculation ASBR—Calculating routes on ASBRs.
• Calculation inter AS—Calculating AS-external
routes.
• Calculation end—Ending phase of calculation.
• N/A—Route calculation is not triggered.
Redistribute timer Route redistribution timer status: on or off.
Redistribute schedule type
Route redistribution scheduling type:
• RIB—Redistribute routes through the RIB table.
• Self—Redistribute routes through the routing table.
• N/A—Route redistribution is not triggered.
Redistribute route count Number of redistributed routes.
Process reset state
Process reset state:
• N/A—The process is not reset.
• Under reset—The process is in the reset progress.
• Under RIB smooth—The process is synchronizing
RIB routes.
Current reset type
Current process reset type:
• N/A—The process is not reset.
• GR quit—Normal reset when GR quits abnormally.
• Delete—Delete OSPFv3 process.
• Undo router-id—Delete router ID.
• Set router-id—Set router ID.
Next reset type
Next process reset type:
• N/A—The process is not reset.
• GR quit—Normal reset when GR quits abnormally.
• Delete—Delete OSPFv3 process.
• Undo router-id—Delete router ID.
• Set router-id—Set router ID.
Reset prepare message replied
Modules that reply reset prepare messages:
• P—Neighbor maintenance module.
• S—LSDB synchronization module.
• C—Route calculation module.
• R—Route redistribution module.
Reset process message replied
Modules that reply reset process messages:
• P—Neighbor maintenance module.
• S—LSDB synchronization module.
• C—Route calculation module.
• R—Route redistribution module.