453
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128. If you do not specify this
argument, the command displays information about all summary routes on the ABR.
verbose: Displays detailed ABR summary route information. If you do not specify this keyword, the
command displays brief ABR summary route information.
Examples
# Display brief ABR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 abr-summary
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 1.1.1.1
Total summary addresses: 1
Prefix : 1000:4::/32
Status : Advertise
NULL0 : Active
Cost : 1 (Configured)
Routes count: 2
Table 107 Command output
Field Descri
tion
Total summary addresses Total number of summary routes.
Area Area to which the summary routes belong.
Prefix Prefix of the summary route.
Status Advertisement status of the summary route.
NULL0 Null 0 route.
Cost Cost to the summary network.
Routes count Number of summarized routes.
# Display detailed ABR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 abr-summary verbose
OSPFv3 Process 1 with Router ID 2.2.2.2
Area: 1.1.1.1
Total summary addresses: 1
Prefix : 1000:4::/32
Status : Advertise
NULL0 : Active
Cost : 1 (Configured)
Routes count: 2
Destination Metric
1000:4:10:3::/96 1
To Next Page
Loading...
Need help?
General
