HP 5920 Series User Manual

458
Field Descri
p
tion
Last exit reason
Last exit reason:
• Restarter—Reason that the restarter exited most
recently:
{ None.
{ Completed—GR is completed.
{ Interval timer is fired—The GR timer expires.
{ Interface state change—An interface state change
occurs.
{ Received 1-way hello—The device receives 1-way
hello packets from the neighbor.
{ Reset neighbor—The neighbor is reset.
{ DR or BDR change—The DR or BDR changes.
• Helper—Reason that the helper exited most recently:
{ None.
{ Completed—GR is completed.
{ Received 1-way hello—The device receives 1-way
hello packets from the neighbor.
{ Grace Period timer is fired—The GR timer expires.
{ Lsa check failed—An LSA change on the GR helper
is detected.
{ Reset neighbor—The neighbor is reset.
{ Received MAXAGE gracelsa but neighbor is not
full—The device receives Grace-LSAs that reached
the maximum age, but the neighbor is not in Full
state.
# Display detailed GR information for all OSPFv3 processes (GR restarter).
<Sysname> display ospfv3 graceful-restart verbose
OSPFv3 Process 1 with Router ID 3.3.3.3
Graceful-restart capability : Enable
Graceful-restart support : Planned and un-planned, Partial
Helper capability : Enable
Helper support : Planned and un-planned
Current GR state : Normal
Graceful-restart period : 120 seconds
Number of neighbors under helper: 0
Number of restarting neighbors : 0
Last exit reason:
Restarter: None
Helper : None
Area: 0.0.0.0
Area flag: Normal
Area up interface count: 1
Virtual-link Neighbor-ID: 100.1.1.1, Neighbor-state: Full

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English