462
IPsec profile name: profile001
Exchanging/Loading neighbors: 0
Wait timer: Off, LsAck timer: Off
Prefix-suppression is enabled
Table 113 Command output
Field Descri
tion
Area Area ID that the interface belongs to.
Interface ID Interface ID.
Instance ID Instance ID.
IPv6 prefixes IPv6 prefix.
Cost Cost value of the interface.
State
Interface state:
• DOWN—No protocol traffic can be sent or
received on the interface.
• Waiting—The interface starts sending and
receiving Hello packets. The router is trying to
determine the identity of the (Backup) designated
router for the network.
• P-2-P—The interface will send Hello packets at the
interval of HelloInterval, and try to establish an
adjacency with the neighbor.
• DR—The router is the designated router on the
network.
• BDR—The router is the backup designated router
on the network.
• DROther—The router is a DR Other router on the
attached network.
Type
Network type of the interface: PTP (P2P), PTMP
(P2MP), Broadcast, or NBMA.
MTU MTU value of the interface.
Priority DR priority of the interface.
Designated router DR on this link.
Backup designated router BDR on this link.
Timer interval configured
Time intervals in seconds configured on the interface:
• Hello—Hello interval.
• Dead—Dead interval.
• Poll—Polling interval on an NBMA network.
• Retransmit—LSA retransmission interval.
• Transmit delay—Transmission delay of the
interface.
Neighbor count Number of neighbors on the interface.
Adjacent neighbor count Number of adjacencies on the interface.
IPsec profile name IPsec profile applied to the interface.