HP 5920 Series User Manual

471
Field Descri
p
tion
Options
LSA options:
• DC—The originating router supports OSPFv3 over
on-demand circuits.
• R—Indicates whether the originating router is an active
router.
• N—Indicates whether the originating router supports NSSA
LSAs.
• x—Reserved.
• E—Indicates whether the originating router can receive AS
External LSAs.
• V6—Indicates whether the originating router takes part in
IPv6 route calculation.
Dead timer due in 33 sec This dead timer will expire in 33 seconds.
Neighbor is up for 00:24:19 The neighbor has been up for 00:24:19.
Neighbor state change count Count of neighbor state changes.
Database Summary List Number of LSAs sent in DD packet.
Link State Request List Number of LSAs in the link state request list.
Link State Retransmission List Number of LSAs in the link state retransmission list.
GR state
GR state:
• Normal.
• Doing GR—Acting as the GR restarter.
• Complete GR.
• Helper—Acting as the GR helper.
Grace period Grace-LSA sending interval.
Grace period timer Grace-LSA sending interval timer.
DD Rxmt timer DD packet retransmission timer.
LS Rxmt timer LSU retransmission timer.
# Display OSPFv3 neighbor statistics.
<Sysname> display ospfv3 peer statistics
OSPFv3 Process 1 with Router ID 1.1.1.1
-------------------------------------------------------------------------
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 1 1
Table 122 Command output
Field Description
Area ID Area ID.
Down
In this state, neighbor initial state, the router has not received any information from a
neighboring router for a period of time.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English