45
network-operator
Parameters
nib-id: Specifies a NIB by its ID in the range of 1 to FFFFFFFF.
verbose: Displays detailed static route next hop information. Without this keyword, the command
displays brief static route next hop information.
Examples
# Display brief static route next hop information.
<Sysname> display route-static nib
Total number of nexthop(s): 44
NibID: 0x11000000 Sequence: 0
Type: 0x21 Flushed: Yes
UserKey0: 0x111 VrfNthp: 0
UserKey1: 0x0 Nexthop: 0.0.0.0
IFIndex: 0x111 LocalAddr: 0.0.0.0
NibID: 0x11000001 Sequence: 1
Type: 0x41 Flushed: Yes
UserKey0: 0x0 VrfNthp: 5
UserKey1: 0x0 Nexthop: 2.2.2.2
IFIndex: 0x0 LocalAddr: 0.0.0.0
...
Table 16 Command output
Field Descri
tion
NibID ID of the NIB.
NibSeq Sequence number of the NIB.
Type Type of the NIB.
Flushed
Indicates whether the route with the NIB has been flushed to the
FIB.
UserKey0 Reserved data 1.
UserKey1 Reserved data 2.
VrfNthp VPN instance to which the next hop belongs.
Nexthop Next hop address.
IFIndex Interface index
LocalAddr Local interface address.
# Display detailed static route next hop information.
<Sysname> display route-static nib verbose
Total number of nexthop(s): 44
NibID: 0x11000000 Sequence: 0
Type: 0x21 Flushed: Yes
To Next Page
Loading...
Need help?
General
