HP 5920 Series User Manual

56
Triggered updates sent: 0
Number of routes changes: 1
Number of replies to queries: 0
Table 19 Command output
Field Descri
p
tion
Public VPN-instance name/Private VPN-instance
name
Public network or VPN where the RIP process runs.
RIP process RIP process ID.
RIP version RIP version 1 or 2.
Preference RIP preference.
Checkzero
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default cost Default cost of redistributed routes.
Summary Indicates whether route summarization is enabled.
Host routes Indicates whether to receive host routes.
Update time RIP update interval.
Timeout time RIP timeout time.
Suppress time RIP suppress interval.
Update output delay RIP packet sending interval.
Output count Maximum number of RIP packets sent at each interval.
Garbage-collect time RIP garbage collection interval.
Silent interfaces
Silent interfaces, which do not periodically send
updates.
Default routes
Indicates whether a default route is sent to RIP
neighbors.
• only—Only a default route is advertised.
• originate—A default route is advertised along with
other routes.
• disable—No default route is advertised.
Default routes cost Metric for a default route.
Verify-source
Indicates whether the source IP address is checked for
received RIP routing updates.
Networks Networks enabled with RIP.
Configured peers Configured neighbors.
Triggered updates sent Number of triggered updates sent.
Number of routes changes Number of route changes.
Number of replies to queries Number of RIP responses.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English