HP 8753E - Sequence 2 Setup

TITLE
FREQ:MODECW;CW 6OOMHZ;:FREQ:CW:STEP 100MHZ
TITLETO PERIPHERAL
DO SEQUENCE
SEQUENCE2
Sequence 2 Setup
The following sequence makes a series of measurements until all 26 CW measurements are
made and the loop counter value is equal to zero. This sequence includes:
n taking data
n incrementing the source frequencies
w decrementing the loop counter
n labeling the screen
1. Press the following keys on the analyzer to create sequence 2:
Note
To enter the following sequence commands that require titling, an external
keyboard may be used for convenience.
Making Mixer Measurements 3.21