Real Format
The
X$&L
softkey displays only the real (resistive) portion of the measured data on a Cartesian
i
::..i.
format (see Figure 6-18). This is similar to the linear magnitude format, but can show both
positive and negative values. It is primarily used for analyzing responses in the time domain,
and
also
to display an auxiliary input voltage signal for service purposes.
pgf3173_c
Figure 6-18.
ReaJ
Format
Ima@naryFormat
me
~~~.~~~~~
softkey
displays
ody
the
ha,ginary
(rea&ive)
pofiion
of
the
measured
data
..~~:::.......................;;.;;;......................................
::.
. .
..T
on a Cartesian format. This format is similar to the real format except that reactance data is
displayed on the trace instead of impedance data.
Application and Operation Concepts
6-37
To Next Page
Loading...
