HP 8753E - Printing or Plotting Your Measurement Results; Configuring a Print Function

Printing or Plotting Your Measurement Results
You can print your measurement results to the following peripherals:
w printers with HP-IB interfaces
n printers with parallel interfaces
w printers with serial interfaces
You can plot your measurement results to the following peripherals:
w HPGL compatible printers with HP-IB interfaces
n HPGL compatible printers with parallel interfaces
w plotters with HP-IB interfaces
w plotters with parallel interfaces
w plotters with serial interfaces
Refer to the “Compatible Peripherals” chapter for a list of recommended peripherals.
Conf@uring a Print Function
All copy coniiguration settings are stored in non-volatile memory. Therefore, they are not
affected if you press Preset] or switch off the analyzer power.
1. Connect the printer to the interface port.
pq64e
\
KEYBOARD
HP-IB PARALLEL
RS-232
PORT
SERIAL PORT
Figure 4-l. Printer Ckmnections to the Analyzer
Printing, Plotting, and Saving Measurement Results
43